I'm getting ready to take my youngest son to an all day Boy Scout Merit badge workshop in Charlottesville, VA tomorrow. We have to be there at 8:00am and he's there until 6:00pm. That means that I have the entire middle of the day to head west to the mountains and play radio!!!
I'll be traveling over to Afton Mountain and then I'll head up Skyline Drive for a few miles to a "scenic overlook" named Beagle Gap - it's about mile marker 100 on the map. Here is a link to the map.
I'm taking a bunch of gear - maybe too much ;)
6m vertical for SSB/CW
2m/70cm vertical for FM/D-Star (car transceiver)
2m yagi for SSB/CW
70cm yagi for SSB/CW
33cm yagi for FM/P25
23cm yagi for SSB/CW
I'm hoping the weather holds out and is nice.
73 de KJ4WLH
Showing posts with label Amatuer Radio. Show all posts
Showing posts with label Amatuer Radio. Show all posts
Friday, March 1, 2013
Friday, February 22, 2013
P25 vs FM on 900Mhz
Since I've been using P25 with some 900Mhz gear, I thought it might be nice for those without the gear to hear the difference. Check out the link to YouTube
Thanks to Dave (N4MW) and Fred (WB4KXS) for the great QSO :)
73 de KJ4WLH
Thanks to Dave (N4MW) and Fred (WB4KXS) for the great QSO :)
73 de KJ4WLH
Wednesday, October 24, 2012
2012 BSA Jamboree on the Air
2012 Boy Scout Jamboree on the Air (BS-JOTA)
Link to Pictures:
The BS-JOTA was held on Saturday, October 20th from 8:30 a.m. until 5:15 p.m. at the Cub Adventure Camp, located in Maidens, VA. The BSA Heart of Virginia Council's Cardinal District held a Cub Scout "Cub Olympics" during the weekend of October 19th - 21st. Approximately 1,200 Cub Scouts and their families camped during the weekend.
I'd like to thank the following individuals and sponsors:
The BS-JOTA team set up an HF station, D-Star station, VHF/UHF station, and IRLP station over the day. Contacts on HF were made all over the United States, Canada, and even over to Europe! Austin Thomas (N4CVA), a Boy Scout was instrumental in showing the Cub Scouts how to make the "correct" contact - and MANY boys did make HF contacts throughout the day! Austin did a fantastic job!
When large numbers of Cub Scouts showed up at the BS-JOTA station, Win Grant (WA4SSG) and David Thomas (KB4IQT) would take small groups a few dozen yards away from each other and they would use HT's to make contacts with each other. Needless to say, a LOT of "local" contacts were made as well!
Armand Hamel (WA1UQO) brought one of the most fun instruments of the day - a key and code practice oscillator! I believe Armand's key was the MOST USED piece of equipment - at least 100 scouts touched the key and the just LOVED making it squeak and squeal. One "lesson" shared with the boys was teaching them how to say "HI" in Morse Code: ". . . . . ." The best part of having the boys learn to key "HI" was telling them that they could use their flashlights and do the SAME THING with the light - they could "talk" to each other in "secret code"!! Big smiles, you could almost see the wheels turning in their heads as they figured out what they were going to do later that night.
The D-Star station was connected to the BS-JOTA reflector (REF033A) and occasionally to the Atlanta reflector (REF030C). D-Star contacts were light as most of the operators were VERY busy helping the scouts talk either on HF or HT's in the small groups. There were a lot of stations making contacts throughout the world on the BS-JOTA reflector: Argentina, UK, New Zealand, and many others. It was great hearing all the different countries and the accents of the stations were really interesting to the scouts as well.
As the afternoon wore on, the Scouts (and the operators) were getting tired! The HF station was shut down and we linked the RATS UHF IRLP node to the BS-JOTA node (9091). Scout after Scout after Scout made contacts primarily with other scouts in Canada and Texas. At least 20 Scouts made contacts with other Scouts; and an occasional Ham as well - all over IRLP!
The day went great! At least 50 - 60 Scouts made contacts with someone, mostly with other Scouts. The day was beautiful. The volunteers made the day go smoothly and were so generous with their time. My final thoughts are these - I really enjoy ham radio and I also sharing my passion for this great hobby of ours with people who are open to new ideas! We are the ones who make the entrance to our hobby "friendly" and "welcoming". Get out there and "welcome" someone into your hobby today!
73 de KJ4WLH
Jim Bates, Troop 876, RARC Member, RATS Member
Link to Pictures:
The BS-JOTA was held on Saturday, October 20th from 8:30 a.m. until 5:15 p.m. at the Cub Adventure Camp, located in Maidens, VA. The BSA Heart of Virginia Council's Cardinal District held a Cub Scout "Cub Olympics" during the weekend of October 19th - 21st. Approximately 1,200 Cub Scouts and their families camped during the weekend.
I'd like to thank the following individuals and sponsors:
- Richmond Amateur Radio Club (RARC)
- Sponsored the BS-JOTA station
- Provided HF equipment
- D-Star repeater access
- Richmond Amateur Telecommunication Society (RATS)
- UHF IRLP repeater access
- Cardinal District, Heart of Virginia Council
- Provided facilities for the BS-JOTA station
- Allowed the station to be part of the "Cub Olympics"
- Volunteers (in callsign order)
- KB4IQT - David Thomas - Troop 832
- KK4DWX - Bob Kendig
- N4CVA - Austin Thomas - Troop 832
- WA1UQO - Armand Hamel
- WA4SSG - Win Grant
- Mac McNeer(K4YEF)
- Use of the RARC Club callsign: W4ZA
The BS-JOTA team set up an HF station, D-Star station, VHF/UHF station, and IRLP station over the day. Contacts on HF were made all over the United States, Canada, and even over to Europe! Austin Thomas (N4CVA), a Boy Scout was instrumental in showing the Cub Scouts how to make the "correct" contact - and MANY boys did make HF contacts throughout the day! Austin did a fantastic job!
When large numbers of Cub Scouts showed up at the BS-JOTA station, Win Grant (WA4SSG) and David Thomas (KB4IQT) would take small groups a few dozen yards away from each other and they would use HT's to make contacts with each other. Needless to say, a LOT of "local" contacts were made as well!
Armand Hamel (WA1UQO) brought one of the most fun instruments of the day - a key and code practice oscillator! I believe Armand's key was the MOST USED piece of equipment - at least 100 scouts touched the key and the just LOVED making it squeak and squeal. One "lesson" shared with the boys was teaching them how to say "HI" in Morse Code: ". . . . . ." The best part of having the boys learn to key "HI" was telling them that they could use their flashlights and do the SAME THING with the light - they could "talk" to each other in "secret code"!! Big smiles, you could almost see the wheels turning in their heads as they figured out what they were going to do later that night.
The D-Star station was connected to the BS-JOTA reflector (REF033A) and occasionally to the Atlanta reflector (REF030C). D-Star contacts were light as most of the operators were VERY busy helping the scouts talk either on HF or HT's in the small groups. There were a lot of stations making contacts throughout the world on the BS-JOTA reflector: Argentina, UK, New Zealand, and many others. It was great hearing all the different countries and the accents of the stations were really interesting to the scouts as well.
As the afternoon wore on, the Scouts (and the operators) were getting tired! The HF station was shut down and we linked the RATS UHF IRLP node to the BS-JOTA node (9091). Scout after Scout after Scout made contacts primarily with other scouts in Canada and Texas. At least 20 Scouts made contacts with other Scouts; and an occasional Ham as well - all over IRLP!
The day went great! At least 50 - 60 Scouts made contacts with someone, mostly with other Scouts. The day was beautiful. The volunteers made the day go smoothly and were so generous with their time. My final thoughts are these - I really enjoy ham radio and I also sharing my passion for this great hobby of ours with people who are open to new ideas! We are the ones who make the entrance to our hobby "friendly" and "welcoming". Get out there and "welcome" someone into your hobby today!
73 de KJ4WLH
Jim Bates, Troop 876, RARC Member, RATS Member
Tuesday, September 25, 2012
6m loop problem - BIOLOGICAL!!!
Wow, I guess I just live and learn...
I few weeks, perhaps months now I suppose, my 6m loop stopped being resonant on 50.125. Really weird - I mean, it looked fine and was hanging right where it had been for a while and I hadn't done ANYTHING with it except use it. I really didn't understand what was going on.
So, last weekend I dropped the antenna and tried to re-adjust it so that it would be resonant (again!) on 50.125 +/-. It was really strange; I'd tune/adjust it, raise it up 20' or so, think that I'd just about got it and then it would change on me. It was really frustrating. So, I adjusted it "one last time" and hauled it up into the air.
Wouldn't you know; it wouldn't tune on my 9100! My 7600 would tune it up, but that didn't make a whole lot of sense to me. I used my antenna analyzer and it was around 3:1 match!!! WHAT??!!?? ARGHH!!
(In case you haven't followed my rants recently, I've have a bad run of radio luck...)
Time passes... And now it's this afternoon - beautiful day and I have about an hour to kill until my next activity kicks up; sounds like a good time to take a look at the 6m loop problem. So, I dropped the antenna again, got out the M2 6m loop PDF and adjusted all the parts to the specs in the PDF. HOWEVER, when I was banging on the metal trying to shift parts around, ants started crawling out of the aluminum tubing! A LOT of ANTS - I mean, tons!!! How strange? Anyway, I kept on making noise and gave them a little while to clear out.
I went back later and it seemed like they'd moved on - I guess most of them did anyway. So I hauled the antenna back up in the air and guess what - 1.2:1 match :)
My "moral of the story is this", there is always a reason - it just might be stranger than what you think it is!
73 de KJ4WLH
I few weeks, perhaps months now I suppose, my 6m loop stopped being resonant on 50.125. Really weird - I mean, it looked fine and was hanging right where it had been for a while and I hadn't done ANYTHING with it except use it. I really didn't understand what was going on.
So, last weekend I dropped the antenna and tried to re-adjust it so that it would be resonant (again!) on 50.125 +/-. It was really strange; I'd tune/adjust it, raise it up 20' or so, think that I'd just about got it and then it would change on me. It was really frustrating. So, I adjusted it "one last time" and hauled it up into the air.
Wouldn't you know; it wouldn't tune on my 9100! My 7600 would tune it up, but that didn't make a whole lot of sense to me. I used my antenna analyzer and it was around 3:1 match!!! WHAT??!!?? ARGHH!!
(In case you haven't followed my rants recently, I've have a bad run of radio luck...)
Time passes... And now it's this afternoon - beautiful day and I have about an hour to kill until my next activity kicks up; sounds like a good time to take a look at the 6m loop problem. So, I dropped the antenna again, got out the M2 6m loop PDF and adjusted all the parts to the specs in the PDF. HOWEVER, when I was banging on the metal trying to shift parts around, ants started crawling out of the aluminum tubing! A LOT of ANTS - I mean, tons!!! How strange? Anyway, I kept on making noise and gave them a little while to clear out.
I went back later and it seemed like they'd moved on - I guess most of them did anyway. So I hauled the antenna back up in the air and guess what - 1.2:1 match :)
My "moral of the story is this", there is always a reason - it just might be stranger than what you think it is!
73 de KJ4WLH
Sunday, September 16, 2012
2m Stack Complete - Results, Hmmm...
Well, the 2m stack is hanging the back yard and I guess it's ok. You know, I keep thinking that the effort will mean something substantial - though I know it isn't really. So, here's what I figure out:
- 3db gain for a pair of loops +/- is a LOT of trouble for half an S-Unit.
- I think my 2m pre-amp is broken :(
- My LMR-400 N connector pins don't fit my LMR-400 coax...
- ARGHHH...
Sometimes I wonder why I do these things! I'm super frustrated that the pre-amp isn't working. I'm pretty much ready to stop purchasing anything used from folks I don't know. I mean, it was working on the bench - so, one everything it cable'd up, tie wrapped in place, and hanging up in the air - it decides NOT to work? What's up with that?
So, all the gear is done and I still hear the faint signals of N4MW's 2m beacon on 144.280. Pre-amp doesn't help at all and I guess sometime I'll figure out what my "lesson learned" is.
All I know is that today, I'm really tired of failure...
73 de KJ4WLH
Thursday, September 13, 2012
D-Star DVAP with laptop tether to cell - Amazing!
Last night I was sitting in my hotel room, thinking about how ridiculous it is that any hotel would charge $20/day for internet access. $35 for "fast" service. What a joke...
So, for the first time, I decided to tether my phone to my laptop and just use my cell data connection for my internet access. Seemed to work OK, actually was better than I thought it would work. In fact, I'm using it right now to update this page :)
Anyway, when I travel I always take my IC-92AD and my DVAP (red). So, I got it out, plugged it in, and connected to the internet. Wow, that was easy - it just worked (like I've grown to expect!)
My local club, Richmond Amateur Radio Club (RARC), located in Richmond, VA has a D-Star net that runs on Wednesday evening at 8pm (EDT). I took a break from my Morse Code practice to join the net and it WORKED GREAT!
I've heard of folks using their cell connection in their car traveling all around the country staying in D-Star contact, but this is the first time that I'd ever done it. It's more fun than it sounds.
So, no R2D2 during the net and it was awesome being able to chat with my buddies - just like I was local.
73 de KJ4WLH
So, for the first time, I decided to tether my phone to my laptop and just use my cell data connection for my internet access. Seemed to work OK, actually was better than I thought it would work. In fact, I'm using it right now to update this page :)
Anyway, when I travel I always take my IC-92AD and my DVAP (red). So, I got it out, plugged it in, and connected to the internet. Wow, that was easy - it just worked (like I've grown to expect!)
My local club, Richmond Amateur Radio Club (RARC), located in Richmond, VA has a D-Star net that runs on Wednesday evening at 8pm (EDT). I took a break from my Morse Code practice to join the net and it WORKED GREAT!
I've heard of folks using their cell connection in their car traveling all around the country staying in D-Star contact, but this is the first time that I'd ever done it. It's more fun than it sounds.
So, no R2D2 during the net and it was awesome being able to chat with my buddies - just like I was local.
73 de KJ4WLH
Sunday, July 29, 2012
Helping other Ham's in time of need
Well, this was certainly an interesting weekend... Apparently, I'm Google "search-able" somehow or another
I received a phone call from a young man, who explained that his grandfather - WZ0T, was diagnosed with terminal cancer. He said that he and his father had travelled to Newport News, Virginia to be with his grandfather. The father and son were planning on packing up all of home furnishings and they had no idea how to "take down" the 40' tower in the back yard. "Did I know someone who could help?"
Wow - talking about feeling responsible for helping, "Of course I can try to find someone to help!" I offered to try and find someone who might be able to help.
I thought of a few people and a good friend of my immediately came to mind - N4MW, Dave. Dave is a well "traveled" tower climber and I had all the confidence in the world that he'd be able to help these guys with at least some answers. I called Dave and he graciously agreed to talk with the family. Dave called back later, let me know that he'd be heading down on Sunday afternoon to help take the beam and tower down, "Would I like to help?" OF COURSE!!!!
A little bit of a side note here; my wife and daughter left this morning for a week long mission trip to New York City - they'll be serving the homeless throughout Brooklyn, please pray for them :) Selfishly, that also meant that I didn't have much of a timeline for the afternoon and could play radio!
I meet up with Dave on Sunday afternoon and we head off with all his tools of destruction and mayhem - I mean he had a LOT of tools, very specialized tools tailored for just the kind of work we were heading off to do.
We arrived and after a bit of "negotiation" agreed that the beam and rotor would stay with the family and the tower would go home with Dave. This was great, I was going to see a pro at work!
Dave climbed the tower and fixed the broken/jammed "Hazer" and managed to slowly lower the beam down to the ground. Well, not quite the ground but about 5' off the ground, which was perfect for working on getting the bolts off the mast. We removed the beam and positioned it around the yard so it would be out of the way of any potential damage. After removal of miscellaneous cables, coax, ropes, etc. we then began the work of dropping the tower to the ground.
Dave tied a rope 2/3 of the way to the top of the tower and tied it to his truck; he tied a 2nd rope to the other side of the tower and I hauled it over to the opposite side of the yard. He cut the 1st tower leg and then cut the 2nd and 3rd legs partially through. Dave got into his truck and gave me the go-ahead to start pulling. Pull I did and the tower began to tilt my way; Dave started moving his truck forward a little bit and the tower was coming down! It made it's way to the ground and that part of the job was complete!
We disassembled the tower legs, cleaned up the tools and packed the tower parts into the truck. We said goodbye to the family and headed on back to Dave's QTH.
All in all, a very good afternoon!
73 de KJ4WLH
I received a phone call from a young man, who explained that his grandfather - WZ0T, was diagnosed with terminal cancer. He said that he and his father had travelled to Newport News, Virginia to be with his grandfather. The father and son were planning on packing up all of home furnishings and they had no idea how to "take down" the 40' tower in the back yard. "Did I know someone who could help?"
Wow - talking about feeling responsible for helping, "Of course I can try to find someone to help!" I offered to try and find someone who might be able to help.
I thought of a few people and a good friend of my immediately came to mind - N4MW, Dave. Dave is a well "traveled" tower climber and I had all the confidence in the world that he'd be able to help these guys with at least some answers. I called Dave and he graciously agreed to talk with the family. Dave called back later, let me know that he'd be heading down on Sunday afternoon to help take the beam and tower down, "Would I like to help?" OF COURSE!!!!
A little bit of a side note here; my wife and daughter left this morning for a week long mission trip to New York City - they'll be serving the homeless throughout Brooklyn, please pray for them :) Selfishly, that also meant that I didn't have much of a timeline for the afternoon and could play radio!
I meet up with Dave on Sunday afternoon and we head off with all his tools of destruction and mayhem - I mean he had a LOT of tools, very specialized tools tailored for just the kind of work we were heading off to do.
We arrived and after a bit of "negotiation" agreed that the beam and rotor would stay with the family and the tower would go home with Dave. This was great, I was going to see a pro at work!
Dave climbed the tower and fixed the broken/jammed "Hazer" and managed to slowly lower the beam down to the ground. Well, not quite the ground but about 5' off the ground, which was perfect for working on getting the bolts off the mast. We removed the beam and positioned it around the yard so it would be out of the way of any potential damage. After removal of miscellaneous cables, coax, ropes, etc. we then began the work of dropping the tower to the ground.
Dave tied a rope 2/3 of the way to the top of the tower and tied it to his truck; he tied a 2nd rope to the other side of the tower and I hauled it over to the opposite side of the yard. He cut the 1st tower leg and then cut the 2nd and 3rd legs partially through. Dave got into his truck and gave me the go-ahead to start pulling. Pull I did and the tower began to tilt my way; Dave started moving his truck forward a little bit and the tower was coming down! It made it's way to the ground and that part of the job was complete!
We disassembled the tower legs, cleaned up the tools and packed the tower parts into the truck. We said goodbye to the family and headed on back to Dave's QTH.
All in all, a very good afternoon!
73 de KJ4WLH
Saturday, May 12, 2012
QRZ Archive - This is all my content that I hosted on QRZ for a while
Here is my Archive
2012-05-09
Ok, I've taken enough grief about my YouTube video... Here is a link to version 2http://youtu.be/MgaTY0tVLkQ I hope that the "real world" test is accepted by the Amatuer Radio Community :)
Ok, I've taken enough grief about my YouTube video... Here is a link to version 2http://youtu.be/MgaTY0tVLkQ I hope that the "real world" test is accepted by the Amatuer Radio Community :)
Seriously though, I admit it - the 1st video wasn't "real world"...
2012-04-29
The 6 meter guys (50215.net) had a tailgate party last Saturday morning, I took my youngest son over there and we got to say hello to a bunch of folks. It was a really nice time! My son, who is 12, decided that a little Icom receiver (IC-R100) looked pretty interesting - I wish I'd had one when I was a child! So, a little father/son negiotation and we agreed that it would be best if that little unit came on home with us :) Lots of smiles...
I dug up an old Astron power supply; ran the R100's long wire around his room and up into the attic. Connected all the proper cables, READ the instruction manual and powered it up - IT WORKS GREAT! My son is so excited, he told me that he listened to the receiver to a station in Tokyo until early in the morning... What more could I ask for?
So, that's the good news. The bad news is that I borrowed an SWR meter for the 800/900Mhz range. Why's that bad? Because I own an antenna that has about a 3.5/4.5 to 1 SWR around the 927Mhz freq! The guys in my area use 927.150 as the primary simplex frequency. Very disapointing - I had Will help me make a YouTube video to share: http://youtu.be/bxXEVyY0e8M You can see the sweep in all it's ugly glory :(
Oh well, the good truly outweighed the bad over the weekend! I guess if I'm trying to be a glass half full, this gives me another "opportunity" to locate/figure out what to do on 900Mhz regarding antenna issues!
2012-04-18
I have been involved in quite a few things recently - 900Mhz, D-Star Gateway configurations, writing articles for my local radio club, antenna (re-designs' of course!), and Morse Code! Lots of activity, mostly good, some challenging - but, in the end, just means the hobby continues to provide a great outlet for me :)
900Mhz - A buddy of mine, Richard (WB4FAX), and I have a short stretch of road that we travel along each morning. So, instead of saying hello on 146.520; we say hello on 927.150! We get some miles out of the gear - we both have Kenwood981's and they do about 10 watts +/-... Once I head off the main road, we usually have 3 - 5 minutes of more talk time and then jump back over to 2m simplex. I do love simplex - there is always a challenge there! Yeah, I live right under 3 really decent repeaters, but who's looking for range and reliability? Isn't this ham radio? :)
I've also been helping the Richmond Amateur Radio Club with the D-Star gateway server configuration. That's been quite a fun project as well - plenty of challenges too, but at this point, I hope the worst is behind us! Our repeater "stack", which includes both the 2m and 70cm modules, now has access to other reflectors/repeaters using TCP/IP (the Internet.) All very exciting!
I continue to write, albeit with little feedback from my reader(s). Still struggling a bit with this one; I'm asked to write articles for the club newsletter, but I often wonder if anyone even finds them remotely interesting. Perhaps they don't and that's why I'm now shunned at the monthly meetings (just kidding...) Seriously though, I don't really ever get any feedback - good or bad, about the articles. It sure would be nice to know how they are received. Or not...
Code, code, and more code! Another buddy of mine, Dave (N4MW), lent me a code practice oscillator(CPO) - just Google "CPO" and I bet you'll see Dave's website in the first page of results - if not the FIRST result! Anyway, I must say, sending code has been very fun! Quite different that the struggle that I've had (and am still having) trying to listen to code. It seems that the code just keeps coming and coming and coming and ... I wish I could slow it down sometimes; but I guess the right answer is just to learn it and be done with it all. So, practice sending in the car and at home, while also practicing listening! One day, I'll be a CW ninja - but today, I feel like a CW clown!
2012-01-25
I picked up the PowerMate knob (http://store.griffintechnology.com/powermate-1) from Amazon for $30 on sale and gave it a try... The knob has a couple of different controls: spin left/right, knob down (like a click), knob down (long press), and knob down + spin left/right.
I took a look as the RS-BA1 key mappings and went with the following configuration:
Spin Right - > PageUp (Freq Up)
Spin Left - > PageDown (Freq Down)
Knob Down + Spin Right -> Shift + Right Cursor (Tuning Step Down)
Knob Down + Spin Left-> Shift + Left Cursor(Tuning Step Up)
Knob Down -> F (Filter)
You can adjust the "Sensitivity" of each control to make the knob spin for your own comfort level. The knob has a great feel - certainly not as nice as a true VFO, but works well. The knob is also "heavy" with a silicon base to help with slipping on a smooth surface. Anyway, it works well with the RS-BA1 Remote Control and I'll be keeping it :)
2012-01-21
I have grown QUITE comfortable using my RS-BA1 software remotely. I've created a virtual machine (VM) based upon Windows XP that I run on my laptop - the XP VM is built to run the Icom RS-BA1 software, HRD, EZ-Nec, and a couple of other ham based software applications. Works great! I can sit pretty much anywhere I want around the house, plug in my Heil Proset media headset, and have a QSO. Or if I'm interested, I can check out some psk with DM780 and of course, it's all logged with HRD Log... I mean, EVERYTHING, just works! QRZ auto lookups, LOTW uploads, eQSL, hamlog, Oh, but I really have a new "problem" :)
I have grown QUITE comfortable using my RS-BA1 software remotely. I've created a virtual machine (VM) based upon Windows XP that I run on my laptop - the XP VM is built to run the Icom RS-BA1 software, HRD, EZ-Nec, and a couple of other ham based software applications. Works great! I can sit pretty much anywhere I want around the house, plug in my Heil Proset media headset, and have a QSO. Or if I'm interested, I can check out some psk with DM780 and of course, it's all logged with HRD Log... I mean, EVERYTHING, just works! QRZ auto lookups, LOTW uploads, eQSL, hamlog, Oh, but I really have a new "problem" :)
Seems like my AT2K, which is just fantastic, is still "only" a manual tuner :( Fortunately, Palstar has a new auto-tuner - unfortunately, it's expensive... Somehow, I think one of them will make their way to the QTH sooner or later. The reason is this: I can do all the remote stuff I wish, except I am left with the HF band set to a single band with the tuner tuned to a specific frequency. Can't change that remotely...
I did pick up an Icom IC-7000 for mobile work (6 meters). A buddy of mine helped me figure out how to cut a whip using a Larsen 40 coil so that it resonates around 50.125 Pretty cool and works reasonably well; not going to set records for distance - but I am mobile on 6 now :)
Part of the Icom IC-7000 deal included a LDG IT-100 auto tuner. I'm not so much a fan of this tuner; I swapped out my Palstar AT2K and tried to get it to perform with my HF doublet. Not even close to what the Palstar would tune - nowhere near... On 40m and 20m there was some hope for the LDG - but even then, it only got the SWR down to around 1.5 +/- I am just so much MORE impressed with the AT2K - every band, every frequency can get to a perfect match. BUT - the AT2K is still manual :)
I'm glad I tried the LDG - you know, you kinda wonder sometimes whether or not the products you purchase perform as well as you hope - I can truly say that I would recommend a Palstar to anyone, at anytime. The LDG can work great for HF antennas that are "close" to a reasonable resonance anyway (Windom, Buckmaster, etc) - I plan on using the LDG when I take the IC-7000 out on field days, boy scout jamboree on the air, etc. as the IC-7000 does not have an auto-tuner built in. (Which is why I really wanted the LDG included anyway :) )
2011-11-13
I suppose it's been a busy week since the last update. I now have all 6 of my antennas in the air AND they are all connected to a transceiver of some sort :) 1.2GHz vertical, 900MHz vertical, 2m/70cm vertical, 70cm loop, 2m loop, 6m loop, and my 40m doublet! I am so happy I made the move to the "shed"
I suppose it's been a busy week since the last update. I now have all 6 of my antennas in the air AND they are all connected to a transceiver of some sort :) 1.2GHz vertical, 900MHz vertical, 2m/70cm vertical, 70cm loop, 2m loop, 6m loop, and my 40m doublet! I am so happy I made the move to the "shed"
Oh, and YES, I got my I-Com RS-BA1 software working correctly. Which means that I can use my gear pretty much wherever (and almost) whenever I wish. HRD and DM780 are working great as well with the remote software - I've made a couple of PSK31 contacts sitting inside my house (actually at my 'work from home') desk with my comfy headset (Heil Proset) and work laptop. I've got to say, I'm a pretty lazy person at heart and this combo has just increased my level of laziness to a higher level!!!
The shed has come a long way - I have drilled 6 coax holes through the floor and have had no complaints from my XYL. She could care less what happens out there - I've suggested that if I put a portable toilet and a coffee maker I might not have to come back into the house; I'm not sure what it means but she wasn't really upset about that ;)
For now, I'm hoping that my build out process can stop for a while - oh, except that I have about a 1:1.5 SWR on my 70cm loop - I need to get that adjusted, but am thinking that my acquisition and build is over. I'm kinda glad and sad at the same time.
2011-11-04
Geez, it's been a long time since I've had an update... So, I've been "kicked out" of the house as my XYL decided that those "ropes" (coax) hanging from the 2nd story window needed to go... I have a shed out back that I ran power to several years ago - it's now got a heater and in the spring will have a window air conditioner :) Here is a link to some pics of where I'm now sitting:https://picasaweb.google.com/jlbates4/HamShackV10?authuser=0&feat=directlink
Geez, it's been a long time since I've had an update... So, I've been "kicked out" of the house as my XYL decided that those "ropes" (coax) hanging from the 2nd story window needed to go... I have a shed out back that I ran power to several years ago - it's now got a heater and in the spring will have a window air conditioner :) Here is a link to some pics of where I'm now sitting:https://picasaweb.google.com/jlbates4/HamShackV10?authuser=0&feat=directlink
I've also started using the I-Com RS-BA1 software; it sure makes it a lot easier to use the radio from my downstairs office. So, in a strange sort of way, I think I'm actually pretty happy about the way things have turned out! Oh, did I mention that there is a nice piece of unused yard space that's about 8' by 10' just outside the back side of the shed - hmm, that seems like just the right kind of space needed for a big cement slab :) That's got a LONG way to go, but at least there is hope for a future tower...
2011-05-08
Rig Update. Out with the old 7600, in with the new 9100. I've got a buddy, N4MW, who is really, REALLY into VHF+ weak signal stuff. I went and visited; big mistake! I've been bitten hard with the weak signal VHF bug - so much that I picked up a used 910H (with the 1.2GHz module). However, the deal was a big mistake (the 1st time I'd ever been ripped off by someone) and I was so disappointed that I gave up looking at the used market. I subsequently convinced myself that a 9100 would cure me of my ills. It did (at least for now!)
Rig Update. Out with the old 7600, in with the new 9100. I've got a buddy, N4MW, who is really, REALLY into VHF+ weak signal stuff. I went and visited; big mistake! I've been bitten hard with the weak signal VHF bug - so much that I picked up a used 910H (with the 1.2GHz module). However, the deal was a big mistake (the 1st time I'd ever been ripped off by someone) and I was so disappointed that I gave up looking at the used market. I subsequently convinced myself that a 9100 would cure me of my ills. It did (at least for now!)
IMHO the 7600 is a better HF rig. However, as I've been using the 9100, I have discovered that it does everything that I used my 7600 for - pretty darn well. No color scope and I think the 7600 sounded a little better; but functionally - it was very much the same as the 9100. So, I couldn't, in good conscience, just the 7600 sitting around waiting to be used on occasion - listed it on qrz and it sold 20 hours later :)
The UX-9100 modules are sold out in the US and it'll be August before they show up. I guess that's OK, as I've got some 2m/70cm antennas to work out (meaning "to buy" and figure out how to get the XYL to "approve").
The UT-121 (D-Star module) should be arriving this week. I hope to get it installed before Wed night's D-Star net!
Update on my Diamond X300 - I'm pretty disappointed with it actually :( The 9100 has a SWR meter and I was (finally!) able to check my SWR when transmitting to my local 2m/70cm repeaters. It seems that I had a 3+ to infinity reading when trying to hit my local 2m D-Star repeater (147.255)! Most of the 2m bad was 2.5+... HOWEVER, the 70cm band was 1.2 to 1.3 across the entire band! Weird huh? I hit the 70cm D-Star repeater (443.7125) with all of 2 watts - no problem. I took the opportunity to swap my X300 with an old X50 I had in the garage and guess what! 1.2 SWR on both 2m/70cm now! Same coax, same radio - different antenna and VERY different responses :) Needless to say, the X50 is the antenna hanging in the back yard now!
2011-04-05
I think I might have figured out why my Buckmaster is causing me a TON of RFI on 80m & 40m... I changed my station location from one side of my room to the other side of the room and managed to run my coax through my backyard window; that cut my coax run from 200' to about 35'... I didn't need all of the 200' of coax, which was coiled nicely in my attic - coiled huh... I suspect that I had created my own form of choke balun when I was using the 200' run of coax, which now is no longer the case! I've also had to learn much more about the sources of RFI and what you can do to reduce it's impact.
I think I might have figured out why my Buckmaster is causing me a TON of RFI on 80m & 40m... I changed my station location from one side of my room to the other side of the room and managed to run my coax through my backyard window; that cut my coax run from 200' to about 35'... I didn't need all of the 200' of coax, which was coiled nicely in my attic - coiled huh... I suspect that I had created my own form of choke balun when I was using the 200' run of coax, which now is no longer the case! I've also had to learn much more about the sources of RFI and what you can do to reduce it's impact.
Problem #2, I confess - I don't have my gear grounded :( Yes, I admit it... I'm a loser... I've started trying to learn all about grounding scenarios; it would seem that I'll have to move my gear from my comfy, 2nd floor playroom area to my not so comfy garage. That's about the only way that I can see having a proper ground situation. I wish I knew more about electric theory; I'm just not an EE. Sometimes I wonder why I enjoy these kind of struggles. Anyway, redesign of my power, desk, and RFI grounding environment is now under way. Wish me luck!
2011-02-10
Last night I performed my 1st Net Control duty for the Richmond D-Star net. It was both nerve racking and fun; I hoping that this net will become a technical forum for those interested in the D-Star technology and I'll do I best to keep it so.
On the down side, I've been working on hanging my 7 band Buckmaster OCF in the back yard. It would seem that it is now picking up all kinds of interference from everywhere. VERY frustrating... I have also noticed a couple of "strange" side-effects, the primary being that I can no longer receive a good signal from the Richmond D-Star repeater. During the net, my S-Meter was 0 (zero) - nothing! However, I was able to communicate PERFECTLY with the repeater, very strange. No R2D2 garble, perfect copy... I suppose I must have done something with cable routing or antenna placement.
Last night I performed my 1st Net Control duty for the Richmond D-Star net. It was both nerve racking and fun; I hoping that this net will become a technical forum for those interested in the D-Star technology and I'll do I best to keep it so.
On the down side, I've been working on hanging my 7 band Buckmaster OCF in the back yard. It would seem that it is now picking up all kinds of interference from everywhere. VERY frustrating... I have also noticed a couple of "strange" side-effects, the primary being that I can no longer receive a good signal from the Richmond D-Star repeater. During the net, my S-Meter was 0 (zero) - nothing! However, I was able to communicate PERFECTLY with the repeater, very strange. No R2D2 garble, perfect copy... I suppose I must have done something with cable routing or antenna placement.
I guess there is no perfect thing...
2011-01-31
Well, I did some testing of a new 2m/70cm antenna over the weekend. The improvement is fantastic - from an S5 to S9+20 :) I did a little bit of a story and if you'd like, you're more than welcome to read about it... The Mis-Adventures of a Backyard Antenna Hanger Pictures of the "Knuckle Buster."
Well, I did some testing of a new 2m/70cm antenna over the weekend. The improvement is fantastic - from an S5 to S9+20 :) I did a little bit of a story and if you'd like, you're more than welcome to read about it... The Mis-Adventures of a Backyard Antenna Hanger Pictures of the "Knuckle Buster."
2011-01-06
OK, I admit it. I like rag-chewing. I like PSK31. I like 80m. I like rag-chewing on 80m. I like rag-chewing on PSK31 on 80m. The part I've realized that I like best, is getting to know folks within the state of VA (and nearby states as well.) Being able to hold a conversation with someone that you've gotten to know a little bit is nice.
OK, I admit it. I like rag-chewing. I like PSK31. I like 80m. I like rag-chewing on 80m. I like rag-chewing on PSK31 on 80m. The part I've realized that I like best, is getting to know folks within the state of VA (and nearby states as well.) Being able to hold a conversation with someone that you've gotten to know a little bit is nice.
Here's my problem though - all the antenna's that I own with don't "really" do 80m very well. They kinda do, but don't... So, I've just picked up the 7-band Buckmaster OCF. I'm hoping that'll take care of my high SWR's over the 80m band. (Somehow I'm just feeling lucky that I've been able to use my 4-band OCF on 80m so far!)
A buddy of mine and I were playing with different digital modes the other evening and we both agreed that we needed to continue on and experiment some more. Further talking led to the idea that we should just ask if anyone else in the local club (Richmond Amateur Radio Club) might be interested. We'll see how that turns out!
2010-12-08
I just submitted my application for becoming an ARRL VE. Since I just don't have the radio background, I figure I can offer to help my radio club (RARC) with the test sessions - I DO know how to make coffee and chit-chat! I've also decided to represent/participate with the club during next year's Boy Scout JOTA (Jamboree Over The Air) - I've been a Cubmaster for a while and now that my youngest is moving up to Boy Scouts; my time with Cubs is at an end (yea!). It is really tough trying to figure out where my VERY limited skills can be of help when I'm around folks who have decades of experience.
I just submitted my application for becoming an ARRL VE. Since I just don't have the radio background, I figure I can offer to help my radio club (RARC) with the test sessions - I DO know how to make coffee and chit-chat! I've also decided to represent/participate with the club during next year's Boy Scout JOTA (Jamboree Over The Air) - I've been a Cubmaster for a while and now that my youngest is moving up to Boy Scouts; my time with Cubs is at an end (yea!). It is really tough trying to figure out where my VERY limited skills can be of help when I'm around folks who have decades of experience.
2010-11-19
I passed my Extra exam last night! Finally, I can choose to study and follow those parts of the hobby that I really prefer - instead of learning about digital circuit design perhaps I'll start spending time learning things like code :)
I passed my Extra exam last night! Finally, I can choose to study and follow those parts of the hobby that I really prefer - instead of learning about digital circuit design perhaps I'll start spending time learning things like code :)
2010-10-28
I've been working with HRD and more specifically, the Log program part of HRD. I need to create a good looking QSL card too! eQSL.cc is now part of my logging, BUT, I'm stuck using an ugly, default card until I can get off my butt and make sometime that actually looks nice :)
I've been working with HRD and more specifically, the Log program part of HRD. I need to create a good looking QSL card too! eQSL.cc is now part of my logging, BUT, I'm stuck using an ugly, default card until I can get off my butt and make sometime that actually looks nice :)
2010-10-24
Installed a Buckmaster 4-Band antenna over the weekend :) Antenna comparison between my attic fan dipole and the Buckmaster are located at the bottom of this page. The Buckmaster is set up in a flat top config around 50' high.
Installed a Buckmaster 4-Band antenna over the weekend :) Antenna comparison between my attic fan dipole and the Buckmaster are located at the bottom of this page. The Buckmaster is set up in a flat top config around 50' high.
2010-09-21
No more /AG - the FCC updated my record to General Class
No more /AG - the FCC updated my record to General Class
2010-09-15
Update - I passed my General exam over the past weekend :) Put updated pics of my HF antenna system.
Update - I passed my General exam over the past weekend :) Put updated pics of my HF antenna system.
2010-09-01
Hmm, where to begin...
Hmm, where to begin...
The best I can remember would be back to when I was 7 or 8 years old. Somehow, I had received a "toy AM radio" kit - I have no idea where it came from, perhaps it was a Christmas present, though I can't think of who might have picked that out for me. I remember the kit - simple board, a few "spring" wire connectors, a small white knob, an earpiece, and a cylinder with copper wire wound around it. I thought it was SO cool to be able to listen to AM radio stations (though I didn't really care what was being broadcast) without batteries! I have no idea whatever happened to that kit, but I've always had a love for communications ever since.
Anyway, I digress.
I'd tried (half-heartily) to learn Morse Code more than a dozen years ago and couldn't/wouldn't learn it. I attended one HAM meeting where I was SO out of place and had absolutely no idea what everyone was talking about. It wasn't for me.
It's now 2010 and a buddy of mine mentioned that the FCC had dropped the Morse Code requirement to obtain a Tech (and others) license. I was pretty excited to check out where the hobby was - we're talking a whole new era now - the Internet had not only been born, it was full of useful information and folks who would lend a hand to a noob!
My buddy recommended the WY5I site as a good place to obtain information on starting - so I placed my order, got my books, purchased a basic 2m HT to start listening and I'm off!!! I passed my Tech Exam and received my "ticket" on July 15, 2010 :) I'll be working on getting my General very soon and hope to hit the HF airwaves before too long! Here are a few pictures: My messy desk and couple of transceivers.
Here are some pics of my new antenna system:
I've got 40m, 20m, 15m and 10m all off of one coax :) Here is a link of my SWR's for the frequencies:
Time for a change!
I used to have all my HAM Radio blog info located in the QRZ home page, but I've decided that it's time to move it out. Not that I have anything but respect for QRZ, I do! It's just that I use my bio page for blogging and updates much more than just static content. As time goes on, I'll have to find a way to move all that content over here...
Wish me luck - 73 de KJ4WLH
Subscribe to:
Posts (Atom)